産業廃棄物管理票住所印刷(建設系) byNSDev for PC

● Overview
Industrial waste management form (manifest slip) This is an application that prints the address of the construction-related waste manifest.
You can print items such as name, address, and phone number.
You don't have to handwrite the same content over and over again.

****************************
● Preparation and setting
Prepare a serial printer (code system 201PL or ESC / P compatible model) connected to the network. (See below for compatible printers)
(Be careful when purchasing a new product.)
Connect the smartphone or tablet with this app installed to the same network as the printer.
Set the printer's TCP / IP for this app. (Check the connection with Ping.)
(Please consult your system administrator for Android device, printer, and network settings. Our support will be charged.)

****************************
● How to use
1. Enter the name and address you want to print.
2. Execute printing from the menu.
3. Printing will start after the advertisement is displayed.

****************************
● Function
You can register your name, address, and phone number, call them, and enter them easily.
You can adjust the print position (left margin, top margin).

****************************
● Operation check printer model (our operation check printer)
○ Connect the printer server corega FP Server II to NEC MultiImpact 700LX2 with a parallel port

○ Connect the printer server corega FP Server II to EPSON VP-4300 with a parallel port

○ EPSON VP-4300N

****************************
● Printer model that will work
It is assumed that the manifest slip you are using is a physically printable printer.
□ NEC
MultiImpact 700EX
MultiImpact 700JA
MultiImpact 700JE
MultiImpact 700JEN
MultiImpact 700JX
MultiImpact 700JX2
MultiImpact 700JX3
MultiImpact 700LA
MultiImpact 700LE
MultiImpact 700LX
MultiImpact 700XA
MultiImpact 700XE
MultiImpact 700XEN
MultiImpact 700XX
MultiImpact 700XX2
Multi Impact series
PC-PR201 series
All printers with control code "201PL"

□ EPSON
VP-5200N
VP-6200N
All printers with control code "ESC / P"

□ Other manufacturers
○ Printers that support "201PL" as the control code
○ Printers that support "ESC / P" as the control code

****************************
● Printer server
Since the connection is confirmed with Ping, the model that responds to Ping
Models that support the TCP port number 9100 with the RAW protocol

****************************
● Caution
Some environment-dependent characters cannot be printed depending on the printer used.
The characters that can be printed are numbers, alphabets, half-width kana symbols, and JIS first and second level kanji.
Printers that do not support the width of the manifest slip cannot physically print.
A printer whose printer does not support the number of copies of the manifest slip cannot physically print.

□ When using an NEC printer
○ In [Printer Settings], specify [Printer Control Code] as [201PL (NEC)].
○ Specify 8-bit data for "7 / 8-bit data switching" of the internal memory switch of the printer.

□ When using an EPSON printer
○ In [Printer Settings], specify [Printer Control Code] as [EPC / P System (EPSON, etc.)].
○ Specify the off setting for the printer's ESC / P supermarket.


□ When using a printer from another manufacturer
○ If the control code is 201PL, specify [Printer Control Code] as [201PL (NEC)] in [Printer Settings].
○ If the control code is ESC / P, specify [EPC / P system (EPSON, etc.)] for [Printer control code] in [Printer settings].