Globo Vigilanza for PC

Globo Vigilanza is the application of Globo Vigilanza that allows users to remotely manage Dogma, Unica and One alarm centers from the comfort of their smartphone or tablet!

Through this application, the user can control various functions of the alarm system depending on the model of installed control panel. The Application requires the control of up to 50 systems in Cloud, WEB, Tunnel or SMS mode.

The main features in Cloud, WEB and Tunnel mode are listed:

- View the status, switch on and off the individual areas of the system;
- Check for faults or anomalies;
- Check the presence and delete the memory of the alarms;
- View the status of the outputs and activate them;
-Take pictures in case there are camera sensors;
- Access the event history, and view any associated photos;
- View the status of the system zones and possibly enable / disable them;
- Display information on the SIM and the GSM signal level of the control panel;

The main features in SMS mode are listed:

- View the status, switch on and off the individual areas of the system;
- View the status of the outputs and activate them;
- View information on the SIM;

Application running with all post-4.0 Android versions both on smartphones and tablets.

To connect to the Cloud mode from the central alarm side, a permanent connection to the internet is required without the need to open doors.

For the connection in WEB mode from the central alarm side, a WAN connection is required. Router port to open: 8002.

For communication in SMS mode, the control unit must be equipped with a GSM communicator.

For the connection in Tunnel mode the alarm control panel must remain permanently connected to the internet and must be set in "Always Connected" mode. The connection from the app to the alarm control panel is via a Sicep MvsNET operations center. The Sicep MvsNET operations center must send the smartphone an email containing an attachment for configuring the Tunnel mode. This attachment must be opened with the app.

Firmware version required on the Unica control panel: 1.2.0.B121 or later.

Default Pin: 12345