Miller Camera for PC

You can monitor and record captured images by connecting the welding camera WGC400 and camera helmet WG3+ via wireless WIFI.
By going to the menu, you can set the screen FLIP and MIRROR according to the camera mounting location, and you can turn the grid display on/off on the screen.
If the sensitivity (SENSE) of the photo sensor mounted on the camera can be adjusted to 10 levels, the brightness (BRIGHTNESS) of the captured video can be adjusted to 10 levels.
The wireless WIFI SSID can be changed to the letters and numbers desired by the customer.

1. Video monitoring and storage
- When connected to wireless WIFI, the camera screen is displayed in real time, the connected WIFI SSID is displayed at the top, and real-time recording is possible through the REC button.
Recorded video is saved in the DCIM folder.

2. MENU function
1) FLIP
- Flip the display screen up/down
2) MIRROR
- Flip the display screen left/right
3) SENSE
- Used to change the sensitivity of the photo sensor mounted in front of the camera.
Sensitivity levels range from 0 to 10, the higher the level, the higher the sensitivity.
4) BRIGHTNESS
- Used to change the brightness of camera images
The brightness level is 0 - 10, the higher the level, the dimmer the brightness.
5) Show Grid
- Used to display grid-shaped reference lines on the display screen
Turned ON/OFF by clicking the icon
6) CHANGE SSID
- Used to change the SSID used when connecting to wireless WIFI.
It can be used to differentiate between multiple cameras. Up to 8 to 20 English letters and numbers can be used.

3. HELP
- This is a help function that provides step-by-step instructions on how to connect to wireless WIFI.